Fire Extinguisher Welding Machine

Fire Extinguisher Welding Machine

Equipment introduction: The equipment is specially used for fire extinguisher cylinder bottle mouth, upper head, lower head welding equipment. The device is very powerful and can control the stop and start of three guns at will. According to different cylinders included in the stretch cylinder, only when welding the bottle mouth and lower head, the employee can set only two guns to be included in the bottle mouth No. 1 gun and the lower head No. 3 gun. If the welding is made by pipe manufacturing machine or rolling machine barrel that needs to be welded in 3 places, then the employee can also set up three starting guns, the bottle mouth gun No. 1 and the upper head gun No. 2 and the lower head gun No. 3. During the welding process, the bottle mouth and the upper head and the lower head are welded separately, because the circumference of the bottle mouth and the circumferential diameter of the cylinder are different, so the machine needs to rotate 2 times, the specific process is as follows: the staff will put the assembled fire extinguisher barrel above the automatic feeding manipulator, different specifications are equipped with different manipulator molds can accurately fix the product. The employee presses the start button, the manipulator automatically feeds, the spindle automatically tightens the bottle mouth, the tailstock cylinder automatically tightens the lower head and fixes the product, the manipulator automatically returns, the spindle automatically starts to rotate, and the No. 1 welding torch automatically starts the neck ring. At this point, the next assembled product can continue to be placed on the robot with high efficiency. So one employee can usually operate two or three machines at the same time. After the end of bottle mouth welding, the No. 1 welding torch will automatically stop, the lower head and upper head welding torch will start welding, and the welding torch will stop after the welding. The spindle stops rotating, the fixed cylinders are all returned, and the product naturally falls